Exhaust extraction systems for fire brigades
Exhaust extraction systems for fire brigades
Especially fire trucks and other emergency vehicles with diesel engines have a high emission of pollutant inside the fire station. In case of emergency the respiratory rate of the fire men is increased as a result of stress and hurry, and in addition more oxygen and more pollutants are inhaled, which increases the risk of cancer.
Our systems for exhaust extraction from fire trucks and emergency vehicles are an efficient solution. Different systems are recommended depending on the characteristics and the size of the fire trucks, the fire station etc.. Diesel engine emissions must always be captured at the exhaust pipe outlet. Exhaust gas extraction must work with negative pressure and equipment must be designed to capture exhaust gases at the source to the highest possible extend and must be extracted out of the fire station. To ease the use in case of emergency the extraction must come from above and it must be as close as possible to the exhaust pipe of the vehicle. An example of an efficient solution is an extraction system that automatically disconnects when the vehicle leaves the fire station.
Extraction systems suitable for capturing the exhaust gases:
The electromagnetic attachment to the vehicle. An electromagnet holds the hose to the vehicle. The nozzle is in front of the exhaust and captures the exhaust gas. When moving out of the hall, the electro magnet is released at the end of the suction section and the emergency vehicle can drive out without stopping. When the vehicle returns, the exhaust gas extraction system is attached as the vehicle enters the hall and the exhaust gases will be captured again.
The pneumatic attachment to the vehicle. The nozzle will be pulled over the exhaust and inflated with compressed air. That works automatically via a compressed air hose integrated into the extraction system from the central compressed air supply or with a hand pump. When leaving the hall, the nozzle at the end of the suction section is automatically emptied from air and the emergency vehicle can drive out without stopping. When the vehicle returns, the exhaust gas extraction system is attached as the vehicle enters the hall and the exhaust gases will be captured again.
Another option is a mechanical system with clamping tongs which operates by means of a Bowden cable.
Contact us to get our advise to obtain the best possible solution.
Alternative exhaust extraction systems for fire trucks and other emergency vehicles
Typical rideshare solutions for firetrucks and emergency vehicles
MRS - Magnetic rail system example
MRSP – Magnetic Rail System Premium
PRS – Pneumatic rail system
Vehicles with vertical exhaust
System with central exhaust air connection
A solution with channel duct
Receive newsletter
Inspiration
GEOVENT A/S is also able to deliver customized solutions.
Below we show a selection of installation examples where we have found a solution for the customer.
Is it ATEX?
When gasses or dust is to be extracted the question of ATEX is coming up? At Ottobock Ireland (www.ottobock.ie) this question came up, as they
Larger vehicles in farming – higher demands to the extraction system
Over the years the size of tractors and other farming vehicles have increased. This enhances the need for efficient extraction systems at the workshops maintaining
New extraction arms and correct use
Often companies have old and malfunctioning extraction equipment.This means that the health of the employees is not protected from illnesses and consequently, increased costs. In
Engineering and manufacturing
Arolco Engineering Solutions provides engineering services combined with a modern manufacturing facility. With up to date machinery and technology they use their technical expertise they
Technical college, CEU Herning
28 pcs. of 3 m ø160 mm WING arm with GFD Motor damper. Delivered to a technical college in Herning, Denmark, where they educate the craftsmen
Aalborg Industries
For welding of large items a large flexibility is needed. Therefore, we have developed this 8 m long ø200 mm extraction arm for Aalborg Industries.
Fast Delivery
We offer the best delivery time in the industry!
We appreciate when customers order goods well in advance – but we also understand, that is can be difficult. Therefore, we want to be part of the solution.
Our priority is to have a relatively large stock, because we know that it creates value for our customers. Therefore, we always have a wide range of extraction arms, hose reels, filters and other components for ventilation and extraction systems in stock.
Delivery of standard products with short notice we see as a part of the optimal service for you.
We keep focus on servicing our customers
We have considerable experience in solving even the most complex special tasks.
We believe in long term relationships with Partners, distributors and end customers. We believe in a constructive cooperation, where we literally do what we can to help each other!
We have a wide range of standard products, which we combine to an efficient and competitive solution for you. If necessary, however, we are ready to use our long term experience to develop a special solution to your exact need.
Please feel free to contact us with any inquiry you may have.
Competent guidance is your guarantee for feeling secure
We have considerable experience in solving even the most complex special tasks.
If you cannot find what you are looking for on our website, we can probably help you develop the solution.
Contact us and let us talk about the opportunities